Waterjet cut machine has long proven that it’s the best solution for cutting and mitering extra hard materials like porcelain and Dekton. The machine is capable of increasing material yield and offers operating efficiency. This equates to reduced costs and more savings compared to other conventional equipment.
Cutting Stone with Waterjets
Cutting stone with waterjet has greatly advanced in the last few decades and today, it is rapidly increasing in terms of popularity as fabricators prove the manifold of benefits that this technology offers.
The key driver when it comes to change is being accelerated by the introduction of extremely hard sintered ceramics that can be very challenging to cut using conventional saws. Some examples of such materials would include products like porcelain. These new batch of ceramics offers numerous advantages to the end users, but on the part of fabricators, to miter and cut these materials using conventional equipment can be very slow and may cause bottlenecks in the production process.
Waterjet: It is Best for Cutting Stones?
For a long time now, the technology of waterjet has been the best answer to cut and miter different materials. A water jet cutter makes use of a very high-pressure stream of water. This water is mixed with abrasive which is considered to be a powerful cutting tool that can cut even the hardest material.
Waterjets Cut with Precision
With this technology, fabricators can load common DXF files straight to the equipment, set the mitre position and the required edge finish. It can also cut whole slabs in just one single operation. The “jet” which is the cutting tool has a fine angle of taper which is in the water stream. The majority of waterjet machines today incorporate a taper compensation technology. Its head is slightly tilted to the waste side and delivers a perfect 45-degree angle on the faces that need to be joined.
Waterjets can Reduce Waste
When it comes to cutting curves and sinks, a waterjet cutting machine can greatly reduce the waste in the water treatment equipment. This is because of the fact that the machine only has 1-1.5mm kerf width and this can remove 20mm of material for the whole length of the cut.
Waterjet machines can cut and pierce on all marble, stone, tile, and ceramic regardless how brittle the material is. Now, tap holes, sunk cutouts, and curved which were once cut using power tools can now be cut in just a fraction of time using the machine. Yes, cutting time is greatly reduces compared to when you choose to use other traditional cutting methods. Moreover, the machine eliminates the need to sharpen blades or saws and since it’s a wet process, you don’t have to worry about dust.
Adding a waterjet to your operations is a great investment as you can produce faster while making sure that quality is never compromised.