Testosterone Replacement for Men

The Most Common Blunder on Testosterone Replacement Therapy in Australia

None of us, including those who are actively taking TRT treatment, are qualified subject matter experts on male hormones. Most of the time, we engage ourselves to research everything about it only after we realize that it is indeed a bit complicated HRT (hormone replacement therapy). The truth about this is that we can’t always anticipate get the results we are expecting to have from a qualified HRT program. 

Like for instance, many of us would easily be obliged to undergo this type of HRT process when we are under the impression that one of the underlying reasons for our incessant fatigue is low or reduced amount of testosterone. Only to realize down the road that it is not necessarily the case. 

There is a manifold of reasons why we are experiencing either intermittent or incessant physical fatigue. Low or reduced amount of testosterone in our body is one of the many reasons, or it could be induced by too high amounts of it in our body. It can be brought about also by too high or too low estrogen levels, bad eating habits, nicotine, and sundry of other reasons.

In this article, we are going to take a look into some of these popular blunders on the use of testosterone replacement therapy in Australia and try to shed some light on them. 

Failure to understand the important role that estrogen has on the male human body. 

A low T or reduced amount of testosterone in the body comes with its array of symptoms. However, we can hardly say that each one of those is unique indicating symptoms of Low T. Most of the said symptoms are shared with several other hormones, particularly estrogen. 

One thing is certain, you are bound to suffer from a really bad day when you have too high or low estrogen in your body. It can become or extend even longer, for weeks to months, in case that you will deliberately refuse to treat it. We dread the brain fog which is not so intensely associated with low testosterone as it is to estrogen. Anyone who is having too low or too high estrogen levels are likely to get brain fog. The same is true with low sex drive and fatigue.

People who are a bit overweight are likely to have more difficulty or will be challenged when they try to stay on top of their estrogen levels, the reason being that the aromatase process is going to happen most of the time in the fatty tissues. If you are in this kind of situation and you will introduce an extra amount of testosterone into your body, the likely response your body will have and display is to transform some of it to estrogen. The more testosterone that you will introduce to your body, the more is likely to be converted into estrogen.

If you are lacking awareness in this area, it will render you become easily frustrated by the absence of testosterone treatment symptom relief.  

Sad to say though that it will spell danger for you if you will completely rely on your physician alone and trust that he will have you stay on top of your estrogen level for you. It is said that the vast majority of these physicians are quite having second-thoughts if they should put their patients up on TRT treatment due to their fears of developing prostate cancer. 

While there is no solid connection or basis that testosterone treatment and prostate cancer are associated with each other, strong evidence are pointing out that estrogen has a crucial role to play in the production of prostate cancer cells. For this, we find it strange that these TRT physicians are not adamant about staying on top of estrogen as they administer TRT therapy to their patients. In that case, the best course of action to take if you see that your physician is not taking good action on this area for you, then take the initiative of doing on your own.

Don’t try to center all your efforts and energy on testosterone alone. We highly suggest that you give equal thought and attention to your estrogen also. In addition to this, know also that optimal estrogen range is far more challenging and tricky to acquire compared to testosterone.  

If you have more concerns about this, or if you feel the need to know more about this subject matter we highly recommend that you reach out to your trusted TRT doctor near you for answers.

Waterjet Cutting Machine

What Materials Are Good for Waterjet Cutting?

Industry experts and those who are seasoned in using this state-of-the-art cutting-edge technology are asserting that waterjet cutting is more than just a unique and highly effective material cutting process. It helps you carry out clean cuts using a variety of materials. 

Since this method of cutting materials does not involve the use of heat, it easily became a sought after method for handling and cutting materials that are heat-sensitive. If you have a project and want to veer your subject material away from heat-induced distortion and heat damage, while at the same time you are ensuring smooth, clean, and immaculate cut — waterjet cutting is the method of choice.  

While many people nowadays tend to associate the use of waterjet machines with metals, there is a sundry of materials that can benefit from this technology. We delve into this in the following section below


Waterjet cutting is commonly used in material cutting projects that involve handling and cutting steel and metal. Regardless of the grade of steel, waterjet technology allows you to easily produce seamlessly smooth edges to your object sans excess burr, cracking, burn marks or any other concerns that are usually associated with heat-based cutting. 

When you make use of a heat-based method of cutting, you run the risk of weakening the integrity of the material itself. This is the reason that elevates waterjet technology as the cutting method of choice for many in the industry. 

The complete absence of heat affected zone makes waterjet cutting the favored option when fabricating parts for food processing machines. It is also preferred even in the production and processing of materials for aerospace technology.  

Water Jet Cutting Machine
Water Jet Cutting Machine


There is a manifold of combination materials that waterjet technology can handle and cut, this is true most especially in the case of reinforced plastics. One of the reasons why waterjet machines are now considered as an imperative tool to use in the racecar and aerospace component fabrication industry is because they can quickly and cleanly cut carbon fiber-reinforced plastics. 

The use of waterjet technology is an assurance in itself that fabrication issues like tool wear or clogging are now a thing of the past. Waterjet machines eliminate the need for change tooling, and will never induce melting. And the best part of it, it is not likely to produce noxious or harmful fumes.

Other Metals 

Besides steel, waterjet technology is also capable of handling and cutting other types of metal. Aluminum is one of these metals. As for alloys, they are more challenging to machine cut because they tend to produce heat and thus the risk of distortion would be incessantly present. 

But generally speaking, all sorts of alloys can be effectively handled with a waterjet. 

Additionally, the waterjet cutting method is a great option when cutting and handling titanium since its inherent level of precision is likely going to minimize the amount of waste materials that will be produced. Alleviation of expected waste is crucial when handling or processing expensive metals such as titanium. 

It is also ideal to use when working on reflective metals such as copper, since it takes away the reflectivity issue, much like how it is when it comes to laser cutting.